Explosions Tests

Elsys data acquisition solutions are ideally suited for the measurement of the effectiveness of explosive substances as well as the testing of corresponding protective measures. Here, piezoelectric pressure sensors are used to measure the pressure curve in the vicinity of an explosion. The sensors are connected to a TraNET data acquisition device via a charge amplifier. IEPE (Integrated Electronics Piezo-Electric) pressure sensors can be connected directly thanks to the integrated IEPE supply in the TraNET devices.

The evaluation of the pressure curves as well as the calculations of propagation velocities can be done in the measurement software TranAX.

In order to keep the cables to the pressure sensors as short as possible, it is possible to protect the measurement technology by a RODAS protective housing and to place it very close to the explosion.

Contact Us
Elsys Explosions Tests
  • TraNET FE 404 Data Acquisition Instrument

    TraNET® FE 404

    8 to 16 channel high-speed data acquisition device with Ethernet connection and integrated hard disk.
  • TraNET FE 408 Dust Proof Data Acquisition Instrument

    TraNET® FE 408 DP

    Dust-proof data acquisition unit with up to 32 channels and programmable IEPE/ICP power source on all channels.
  • RODAS - Ruggedized Data Acquisition System


    Ruggedized outdoor data acquisition system and protective housing for TraNET FE Rack and other 19'' devices.
  • EL-PF2 TTL Pulse and Trigger Generator


    The EL-PF2 Pulse Shaper generates clean TTL pulses from noisy input signals.


TranAX® Universal DAQ Software

The TranAX® 4 data acquisition software turns your measurement hardware into a measurement solution. With TranAX® you get the maximum out of the Elsys measurement hardware:

  • Easy configuration of channel and trigger settings, display of waveforms in customizable waveform displays, even of very large data sets.
  • Various scalar-functions and an integrated formula editor for calculations are available for post processing analysis.
  • Repetitive sequences can be automated with the help of the measurement flow control.
  • For measurement reports TranAX has a documentation window to create printable reports.
  • For further data processing, the measurement data can be exported to Matlab, Python or other programming languages and tools.